NOTE: ALL ENGINE SALES SUBJECT TO THE CURRENT BUILD SCHEDULE
**Volume discounts are available on all of our engine configurations. For volume discounts click here to contact us.
Our engines can be configured to fit virtually any application you can imagine. From powering motorized wheelbarrows and go-karts to putting out fires, our engines are extremely tough, reliable, and powerful. We pack a lot of power into a small package and this allows you to adapt it to a wide range of applications.
Horsepower: 8 hp
Displacement: 8.2 cu. in. (134 cc)
Mounting: In any position
Starter: Automatic rewind
Ignition: PVL Electronic Ignition
Spark Plug: NGK BR9HS (14 mm)
Cylinder: Aluminum diecast crankcase-cylinder with removable cylinder head
Cylinder Bore: Nikasil Plated
Crankshaft Output End: Options available
Bearings, Flywheel, and Power Take-Off End: Ball bearings
Bearings, Connecting Rod (Upper): Needle Bearings
Bearings, Connecting Rod (Lower): Needle Bearings
Connecting Rod: Forged Steel
Crankshaft: Forged Steel
Piston: Aluminum Alloy
Rings: Two, Compression
Carburetor Location: Variable - 3 positions possible
Carburetor Type: Diaphragm, with integral fuel pump; permits engine to operate in all positions
Fuel: Gasoline, regular unleaded
Fuel/Oil Mix: One third pint oil to one gallon gasoline - (24:1)
Lubrication: Self-Lubrication with oil in fuel
Weight: 15 1/2 lbs. - approx.
Ignition shut-off switch
Carburetor elbow kit
Optional output ends
PTO Ends (please click to see drawings of each print)
Stock engines are available or engines can be tailored to fit your specific application.